Juniper Systems Juniper Aspect - Manual (Page 98)

94
Juniper Aspect Owner’s Manual
Note: The icon that shows the original location of the
object remains visible at the old location until the
object edit is complete.
A red box appears underneath the Move tool in the
new location. Because the Move tool covers the red
box when it is placed at the new location, you may
have to tap somewhere else on the map to verify that
the red box is at the location that you selected.
6. If you need to move the object again, use the Move
tool to select the red box and place it again by using
the same method.
6. Select Finish, then Save.
Moving an Object Using GPS
1. Use the Select tool to select the object to be edited,
then Edit from the menu.
2. The Object Details screen is shown. Choose Edit
Geometry. The Map It screen is shown.
3. Select Capture Coverage to collect coordinates from
the GPS.