Canon AXIS 1610 - Manual (Page 22)

Section 3: Installation AXIS 1610 User’s Manual 22
3. If it is not already running, start the BOOTP daemon. This is
typically performed using the
bootpd
command.
4. Restart the AXIS 1610 to download the IP address, default router
address, and subnet mask.
The AXIS 1610 can automatically download a customized config
file from a TFTP server. Just add the name of the config file and
the TFTP server’s IP address to your boot table. The config file is
downloaded immediately after the AXIS 1610 receives its IP
address.