Canon AXIS 1610 - Manual (Page 52)

Appendix A: The Parameter List AXIS 1610 User’s Manual 52
Appendix A The Parameter List
The left-hand column shows the parameters and their default
values as they appear in the config file and the right-hand
column shows the name of the parameters as they appear in the
internal Web pages.
Please refer to Section 4 Management & Configuration, on page
32, for more information about how to change the parameters.
Note: ❏ The password parameter, ROOT_PWD, only appears when you are
logged in to the AXIS 1610 using root.
--- GENERAL MENU
NETWORK_SPEED.: AUTO_SENSE AUTO_SENSE, 10_HALF_DX, 100_HALF_DX
PS_NAME. : AXIS100086 Print Server Name (‘AXIS’ followed by the last six digits of the
serial number)
ROOT_PWD. : pass Root Password
SYS_LOC. : System Location
SYS_CONT. : System Contact
--- TCP/IP MENU
TCP_ENB. : YES TCP/IP printing enabled
INT_ADDR. : 0 0 0 0 Internet Address
DEF_ROUT. : 0 0 0 0 Default Router Address
(0.0.0.0 for no router)
NET_MASK. : 0 0 0 0 Net Mask
(e.g. 255.255.255.0 for class C, 0.0.0.0 for auto-sense)
DHCP_ENB. : YES DHCP Enabled
BOOTP_ENB. : YES BOOTP Enabled
RARP_ENB. : YES RARP Enabled
WINS_ENB. : YES WINS Enabled
WINS_ADDR1. : 0 0 0 0 Primary WINS server Address
NBT_SCOPE ID. : NBT Scope ID
(Defines the NetBIOS scope to be used with WINS name
registration)
--- SNMP MENU
TRAPADDR. : 0 0 0 0 Trap Address
TRAP_COM. : public Trap Community
SYS_NAME. : System Name
--- NetBIOS/NetBEUI Menu
LSLM_ENB. : YES NetBIOS/NetBEUI printing enabled