Canon AXIS 1610 - Manual (Page 24)

Section 3: Installation AXIS 1610 User’s Manual 24
Installing Printers for Printing over TCP/IP
Using
AXIS Print Monitor
in Windows 95/98
and Windows ME
Follow the procedure below to install TCP/IP Ports from a
Windows 95/98/Me workstation:
Local Printer Port 1. Install the AXIS Print Monitor on your workstation. The software
is available on the AXIS Product Resources CD.
2. Select Settings |Printers from the Start menu and double-click
the Add Printer icon to start the Add Printer Wizard.
3. Select Local Printer, as the AXIS 1610 emulates a local printer
port and click Next>
4. Choose an appropriate printer driver for your printer.
Note: If the desired driver appears in the manufacturer and
models list dialog, highlight your selection and click
Next> and
proceed to step 7.
5. If the desired printer driver is not available, click the Have Disk...
button. Insert the printer driver CD that was provided with your
printer, select the CD drive and click
OK.
6. Select the desired printer driver from the CD and click Next>
7. Select the TCP/IP port you wish to use and click OK.
Note: The ports will appear in the format <name>_TCP/IP: ,
where <name> is, by default, AXIS followed by the last six digits
of the print server’s serial number (e.g. AXIS560B35_TCP/IP:)
Note: If you wish to install a remote TCP/IP port (i.e. if the TCP/IP
port does not appear in the list), select the LPT1 port and follow
the
Remote Printer Port instructions below.
8. Enter a descriptive name for your printer and click Next>
9. Click the checkbox if you want to print a test page and click
Finish.