Installing printer ports using axis print monitor – Canon AXIS 1610 User Manual
Page 23
AXIS 1610
User’s Manual
Section 3: Installation
23
Installing Printer Ports using AXIS Print Monitor
About
AXIS Print Monitor
AXIS Print Monitor is a Windows component that has been
developed for network printing. It allows your AXIS 1610 to be
connected in the same simple fashion as a local printer port and
once installed, it is automatically initialized upon system start-
up.
Printing Environment
AXIS Print Monitor supports printing over TCP/IP and
NetBIOS/NetBEUI. To enable printing, ensure that the TCP/IP or
NetBIOS/NetBEUI protocol is running correctly on your client.
❏ You can disable the TCP/IP printing protocol or the
NetBIOS/NetBEUI printing protocol from the internal web pages.
Click the
Configuration button and the TCP/IP or
NetBIOS/NetBEUI link and click No to disable the protocol. Both
protocols are enabled (set to Yes) by default.
AXIS Print Monitor needs to be installed on each workstation
for peer-to-peer printing. AXIS Print Monitor allows you to
access all network printers, as if they were connected directly to
your workstation.
Using
AXIS Print Monitor
Refer to the instructions relevant to your network on how to
install and manage a printer using AXIS Print Monitor:
Printing over TCP/IP
•
Using AXIS Print Monitor in Windows 95/98 and Windows ME on
•
Using AXIS Print Monitor in Windows NT, Windows 2000 and
Printing over
NetBIOS/NetBEUI
•
Using AXIS Print Monitor in Windows 95/98 and Windows ME on
•