Canon AXIS 1610 - Manual (Page 47)

AXIS 1610 User’s Manual Section 4: Management & Configuration 47
Using SNMP
You can use SNMP (Simple Network Management Protocol) for
remotely monitoring and configuring the AXIS 1610. All major
functions for print servers are supported.
General Information SNMP refers to a set of standards for network management,
including a protocol, a database structure specification, and a set
of data objects. The AXIS 1610 SNMP implementation runs in
TCP/IP networks.
The management is handled by NMS (Network Management
System) software running on a host on your network. The NMS
software communicates with network devices by the means of
messages, which are references to one or more objects.
A message can be a question or an instruction to a device, or an
alarm triggered by a specific event in a device. Objects are
contained in data bases called MIBs (Management Information
Base), where MIB-II is a standard database.
The AXIS 1610 supports the following MIBs:
• relevant parts of MIB-II
• AXIS MIB
• relevant parts of the Host Resource MIB
• relevant parts of the Printer MIB
• relevant parts of the CANON-MIB