Canon AXIS 1610 - Manual (Page 28)

Section 3: Installation AXIS 1610 User’s Manual 28
Installing printers for Printing over NetBIOS/NetBEUI
Using
AXIS Print Monitor
in Windows 95/98
and Windows ME
Follow the procedures below to install NetBIOS/NetBEUI ports
from a Windows 95/98 or Windows ME workstation:
1. Install the AXIS Print Monitor on your workstation. The software
is available on the AXIS Product Resources CD.
2. To start the Add Printer Wizard, select Settings | Printers from
the Start menu and double-click the Add Printer icon.
3. Click Next> in the first dialog.
4. Select Local printer as the AXIS 1610 emulates a local printer
port and click Next>
5. Choose an appropriate printer driver for your printer.
Note: If the desired printer driver appears in the manufacturer
and models list, highlight your selection, click
Next> and proceed
to step 8.
6. If the desired printer driver is not available in the list, click the
Have Disk... button. Insert the printer driver CD that was
provided with your printer, select the CD drive and click
OK.
7. Select the printer driver you want to install from the CD and click
Next>
8. Select the port you want to use from the Available Ports list and
click Next>.
Note: The port name is, by default, AXIS followed by the last six
digits of the AXIS 1610 serial number, e.g. (AXIS100086:)
9. Enter a descriptive name for your printer and click Next>
10. Click the checkbox if you want to print a test page and click
Finish.