Kenton Plugstation ver.2.01 - Manual (Page 12)

KENTON PLUGSTATION USERS MANUAL
12
DIAGRAM 5: NO PLG CARD FOUND IN SLOT 2
NOTE: THE MAIN DIFFERENCE BETWEEN PLG100 AND 150 SERIES CARDS IS MEMORY BUFFER
LOCATIONS ON THE 150 SERIES, WHICH ARE DESIGNED TO BE USED IN CONJUNCTION WITH
SOME OF THE YAMAHA PROFESSIONAL SYNTHESISERS SUCH AS THE CS6X AND MOTIF. THESE
DIFFERENCES DO NOT APPLY WHEN USING WITH PLUGSTATION, SO IF YOU HAVE A 100 SERIES
CARD, AND THINK THAT YOU NEED TO UPDATE IT TO A 150 SERIES TO GET IT TO WORK, THEN
YOU ARE MISTAKEN. ANY 100 SERIES CARD WILL WORK FINE WITH PLUGSTATION.
After scrolling through the 4 card slots, the menu will then switch to the various GLOBAL options, Y-BOARD
(if fitted) output options, Z board (if fitted) output options, and finally to the master program selection mode.
NOTE: THE MENU OPTIONS FOR THE Y AND Z BOARD WILL APPEAR EVEN IF THEY ARE NOT
FITTED. THIS IS NORMAL. IF THE BOARDS ARE NOT FITTED TO YOUR PLUGSTATION, THEN YOU
SHOULD DISREGARD THE MENU ITEMS RELATING TO THE Y AND Z BOARDS, AS THEY WILL
HAVE NO EFFECT
PARA – This option is where you can view the PARAMETERS associated with either the individual boards,
or the GLOBAL options. Pressing the DATA ENTRY button again with a short press, will take you to this
mode (indicated by the white dot being underneath the PARA line). The text shown in screen at this point
will correspond to the CARD section menu you in. For example, if we show the CARD 1 slot identification
option in CARD menu (as shown the in diagram 4), and press the DATA ENTRY button quickly it will take us
to the BANK SELECT option. This is shown in diagram 6.
DIAGRAM 6: PLG BANK SELECT MSB SELECTION
NOTE: THAT THE LED DOT IS NOW LOCATED UNDERNEATH THE PARA TEXT LINE. THE LED DOT
WILL ALWAYS INDICATE AT WHICH LEVEL OF EDITING YOU ARE. IT IS ALWAYS WORTH
CHECKING ITS LOCATION TO SEE IF YOU ARE IN THE CORRECT LEVEL.