Kenton Plugstation ver.2.01 - Manual (Page 39)

KENTON PLUGSTATION USERS MANUAL
39
nor does it respond over MIDI to avoid confusion with the YVOL or SVOL commands. The controller value
range is from 0-127. Also to avoid confusion controllers 32 and 0 are disabled from this menu, this avoids
unwanted bank select messages being accidentally sent from here.
CVAL – CONTROLLER VALUE. This is the value of the controller data you have just selected. For
example, if you have selected controller 74, you can adjust the brightness of a PLG instrument sound. The
range of each controller is from 0-127
This is all of the board specific parameters, now we shall proceed onto the GLOBAL menu parameters. To
get back to the board selection menu hold down the button for 2 seconds, the DOT LED should now be
below the CARD label. If you accidentally have gone back as far as the STATUS label, just press the DATA
ENTRY knob briefly once, and this will take you to the CARD label. Once there we can proceed
Using the data entry knob to scroll through the settings for the first 4 card slots, the next option you will see
is the GLOBAL PARAMETER settings.
This is denoted on screen by the following display