Kenton Plugstation ver.2.01 - Manual (Page 44)

KENTON PLUGSTATION USERS MANUAL
44
Pressing the DATA ENTRY button for 2 seconds again will return you to the CARD parameter level.
Scrolling clockwise on the DATA ENTRY knob will then take you to the final CARD level menu option.
PRGS – PROGRAM STORAGE – This parameter menu option is where PLUGSTATION stores loads and
dumps its performance/global memory data.
NOTE: YOU CAN SELECT PERFORMANCE MEMORIES FROM THE TOP LEVEL MENU OPTION OR
VIA MIDI. TO DO IT FROM THE FRONT PANEL, GO TO THE STATUS MENU SCREEN (SCREEN YOU
FIRST SEE AT BOOT UP, AND SCROLL THE DATA ENTRY KNOB CLOCKWISE. THIS IS COVERED
EARLIER IN THE USER MANUAL)
A performance memory is any parameter you have adjusted and programs selected for the 4 boards you
may have installed. The PRGS menu is global, so it does not store individual board settings; rather it stores
the current for all of the boards fitted in one of 64 memory locations. This is ideal for the live performer, who
may wish to store multiple board setups for a gig. The options within this menu are
LOAD – Loads in a GLOBAL setup only. The top-level STATUS menu option for Performance selection is
where you can recall your stored performances. The value range for this is only GLOBAL. GLOBAL
includes all non-board specific parameters such as ZSOP, YOPL and other global level parameter settings.
The reason for this is to restore a previously saved GLOBAL setup that you may have inadvertently altered.
It is a kind of fail-safe “get me back to my previous global settings” option.