Kenton Plugstation ver.2.01 - Manual (Page 42)

KENTON PLUGSTATION USERS MANUAL
42
ZSOP – Z BOARD SW1000XG OUTPUT LEVEL MENU This controls the SW1000XG main output level
from the Z-BOARD which defaults to output 1-2 within this menu set. By default the SW1000XG with the Z-
BOARD fitted will send all of its audio and MIDI parts to the stereo output on the front of SW1000XG, and
also to the serial output 1&2 ports on the Serial out connector found on SW1000XG. This when connected to
the PLUGSTATION will correspond to the 1&2 outputs found on the Y-BOARD. This menu item gives you
the option to override this, and attenuate or completely mute the volume level of SW parts being sent by
default to the 1&2 outputs of the Y-BOARD. The commands in this menu (accessed by clicking the DATA
ENTRY knob are as follows)
SVOL – The SW1000XG output volume as detailed above. The value range is 0-127.