Kuzma Stabi - Manual (Page 12)

_________________________________________________________________
S T A B I T U R N T A B L E 12 KUZMA
5. Connecting Power Supply Unit
a) The cable at the back of the turntable has a five pin plug which should be inserted
into connector at rear of power supply. (Fig. 8)
b) Connect mains cable into back of power supply. (Fig. 9)
NOTE: You will see a thin black wire at back of turntable. This is a grounding wire and will
be connected to GND on preamplifier (not on GND of MC step up device) at a later stage.