Kuzma Stabi - Manual (Page 24)

_________________________________________________________________
S T A B I T U R N T A B L E 24 KUZMA
4. Check Oil in Bearing
It should be unnecessary to continually top up bearing oil, but it is advisable to chek
oil level about once a year to ensure that oil reaches all supporting pads of the bearing.
(Fig. 19)
When shaft is removed from bearing the level of oil should appear approximately
25 mm below top surface of bearing. This can easily be measured using a clean
toothpick. If necessary top up oil. (Fig. 5 and 2 f).