Longshine LCS-K916 - Manual (Page 13)

12
Fig. 16: OSD main menu
6.6.2. Stop auto-scan function
Press any key to STOP the auto-scan function.
6.6.3. Auto-scan mode
There are two auto-scan modes, please refer section 7.3.1 Setup in OSD – Scan Mode to setup the auto-
scan mode.
Scan all working computers.
Scan all computers which are marked for auto-scan.
6.6.4. Auto-scan time interval
The auto-scan time interval can be adjustable by pressing <F1> in OSD main menu. Please refer section
7.3.1 Setup in OSD – Scan Time.
Note: You can also start auto-scan function by pressing <F2> in OSD main menu. Please refer section 7.4
Auto-Scan in OSD.
6.7. Console Lock
If the security mode is enabled in OSD mode (by pressing <F5> in OSD mode), you can lock console by
pressing <Scroll Lock> twice, and then <H> and <Enter>. The KVM will be locked until an authorized user
login.
<Scroll Lock> →<Scroll Lock>→<H>→<Enter>
To unlock console, please press any key according to screen message, then key in User Name and
Password. The KVM switch and console devices will be unlocked and back to normal status.
Note: You can also execute console lock function by pressing <F3> in OSD main menu. Please refer
section 7.5 Console Lock in OSD.
7. OSD Operation
7.1. OSD Main Menu
Press < Scroll Lock> twice and <Enter>, then you will enter to OSD (On Screen Display) main menu. The
channel number, names and the status will be displayed on the monitor screen. Please refer fig. 8
•
•