Longshine LCS-K916 - Manual (Page 14)

13
7.1.1. KVM layer number
1 st , 2 nd or 3 rd . indicates the current cascade level.
7.1.2. Channel name
The channel name can be defined by using function key F4, it can remind user which computer is
connected to this channel.
A highlighted pink bar is shown in the selected channel row.
A plus mark (+) showing in the left of channel name indicates that the port has cascades.
7.1.3. Computer & KVM status
KVM buzzer stauts
Buzzer sound on
Buzzer sound off
Logined user name
The system has one administrator and 3 users for security management. The name of current logined is
displayed here.
Channel LOCK indicator ( Status STA )
L: Indicating this channel is locked.
BLANK: Indicating this channel is normal without locked.
Computer power on indicator ( Status STA ), OSD menu will update the flag automatically if the computer
status is changed
A: Indicating this computer is powered on and ready to select.
BLANK: Indicating this computer is not connected or powered on.
Channel scan indicator ( Status STA )
S: This channel is marked for auto-scan if the scan mode is Select type.
BLANK: Indicating this computer is not marked for auto-scan.
7.1.4. Current active channel number
Indicate current active channel number. The channel of the currently selected computer is displayed in the
right-upper corner.
If the active channel is in 2nd or 3rd cascade layer, the display sting is like XX-YY-ZZ. For example, 02-05-07
means the active channel is layer 1 channel 2 links to layer 2 channel 5, and layer 3 channel 7 is selected as
active channel.
7.1.5. Cascade parent channel number
Indicate the parent channel of this cascade layer. The number at the left-upper corner below KVM layer
number shows the number of port for the upper layer, i.e. 8 means link from channel 8 of upper KVM.
It’s valid only for 2nd and 3rd cascade layer. It will show blank for 1st layer since there is no parent channel.
7.1.6. Page down / up indicator
This is for 16-port KVM only. The information of port 1 ~ 8 are display in the first page, and information of
port 9 ~ 16 are display in the second page. Since the port information is divide to two pages, the page down
/ up indicator can remind you to switch to alternative page by using <page down> and <page up> key.
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•