Longshine LCS-K916 - Manual (Page 9)

8
Figure 10: Cascade chaining
Figure 11: Rack mounting
4.5. Firmware download connector
The min-USB female connector on the rear of KVM switch is for firmware upgrade. To update your KVM
firmware, please contact with your dealer.
4.6. Rack Mounting
Figure 11 shows you how to attach mounting brackets to the KVM Switch unit for standard 19-inch rack
cabinet.
1.Screw the mounting brackets into the sides of the KVM Switch unit. ( See Figure 11)
2.Install the KVM Switch unit into the rack cabinet.