Language, Stop auto-scan, Auto-scan mode – Longshine LCS-K916 User Manual
Page 17: Auto-scan time interval, Console lock in osd: <f3
16
Channel Name
Channel Number
Figure 22: Auto-Scan Banner
Indicate now is Scan Mode
Figure 23: Console Lock Banner
Figure 24: Unlock window
7.3.7. Language
English (En) / Deutsch (De) / Francais (Fr), 3 languages are available.
7.4. Auto-Scan in OSD: <F2>
7.4.1. Start to auto-scan in OSD
Press <F2> in OSD main menu. The auto-scan banner will be shown to indicate the scanning channel.
Note: You can also start auto-scan function via hot key by using
<Scroll Lock>
→<Scroll Lock>→<S>→<Enter> outside the OSD mode. Please refer section 6.6.1 Start
Auto-Scan Function.
7.4.2. Stop auto-scan
Press any key on keyboard to STOP the auto-scan function. The auto-scan banner will disappear when the
scan stops.
7.4.3. Auto-scan mode
There are two auto-scan modes, please refer section 7.3.1 Setup in OSD – Scan Mode to set up the auto-
scan mode.
Scan all computers which are power on.
Scan all computers which are marked for auto-scan.
7.4.4. Auto-scan time interval
The auto-scan time interval of each port displayed can be adjustable by pressing <F1> in OSD main
menu. Please refer section 7.3.2 Setup in OSD – Scan Time.
7.5. Console Lock in OSD: <F3>
If the security mode is enabled in OSD mode (by pressing <F5> in OSD mode, please refer section 7.7
Security Setup in OSD). You can logout to lock console by pressing <F3> In OSD mode. The Console
Lock Banner will be shown on the screen.
The KVM will be locked until an authorized user login.
Note: You can also logout to lock console via hot key by using
•
•