Longshine LCS-K916 - Manual (Page 16)

15
Figure 20: Menu Position Setup
Figure 21: Banner Position Setup
7.3.1. Scan Mode
Select:
Scan the selected channels marked with S in STA column on OSD main menu.
PC ON:
Scan all powered on PC channels
7.3.2. Scan Time
The default scan time is 5 seconds. It can be changed up to 90 seconds by stepping 5 seconds.
7.3.3. Banner Time
The default banner time is 5 seconds. It can be changed to 10 seconds, 15 seconds, or always on (∞).
7.3.4. Position
Menu
Use four arrow keys to move the OSD main menu to the desired position. Press <ESC> to save the
changed menu position.
Banner
Use four arrow keys to move the channel banner to the desired position. Press <ESC> to save the
changed banner position.
7.3.5. Hot key
Scroll Lock: <Scroll Lock> becomes the hot key.
Num Lock: <Num Lock> becomes the hot key.
Cap Lock: <Cap Lock> becomes the hot key.
Note: You can also change leading hot key via hot key by using < CTRL > →< CTRL >→< New Hotkey >
→< Enter > outside the OSD mode. Please refer section 6.2 Leading Hot Key Select.
7.3.6. Sound
ON: Buzzer sound enabled.
OFF: Buzzer sound disabled.
Note: You can also enable/disable buzzer sound via hot key by using
<Scroll Lock>
→<Scroll Lock>→<B>→<Enter> outside the OSD mode. Please refer section 6.5 Buzzer
sound Disable / Enable.
•
•
•
•
•
•
•