Longshine LCS-K916 - Manual (Page 20)

19
Figure 31: Lock port in OSD main
window
7.8. Lock Port: <F6>
7.8.1. Lock Port
Only administrator can lock port. Please move the highlight bar to the channel to lock, and press <F6> to
lock the selected channel. A red L mark will be shown in STA column of locked port.
7.8.2. Channel selection of the locked port
If anyone selects the channel of the locked port either by panel push-button or hot key, the system will
enter OSD mode waiting for administrator to unlock the port.
7.8.3. Unlock Port
Only administrator login with correct password can unlock the port. After the administrator login, the red
L mark in STA column will disappear.
7.9. Exit OSD: <ESC>
Press <ESC> to exit OSD and to return to the selected computer. A banner with the channel name will be
shown on left-upper corner of the screen.
8. Sun Microsystems Function Key Emulation:
There are 16 special functions on the Sun Microsystems keyboard, Combo Free KVM Switch can emulate
these function keys via PS/2 and/or USB keyboard.
Please refer to the table shown below for Sun Microsystems keyboard special functions operation.
To active these emulation on the PS/2 and/or USB keyboard, you have to press the <LEFT Window> key
first (this key usually is located between the <LEFT CTRL> and <LEFT ALT>). Then press the second key (
Sun Microsystems Function Key ) . Please do not release <LEFT Window> when you press the second key.
Sun Microsystems Function Key USB or PS/2 Keyboard
Stop L_Win & L_Alt
Props L_Win & L_Ctrl
Compose L_Win & L_Shift
Front L_Win & F1
Open L_Win & F2
Find L_Win & F3
Again L_Win & F4
Undo L_Win & F5
Copy L_Win & F6
Paste L_Win & F7
Cut L_Win & F8
Help L_Win & F11
Power L_Win & F12
Mute L_Win & 1
Volume Down L_Win & 2
Volume UP L_Win & 3