Longshine LCS-K916 - Manual (Page 7)

6
Fig. 1
Figure 5: Console connection
Figure 6: Custom combo
4-in-1 cable
Figure 7: USB & PS/2 (Keyboard &
Mouse) and VGA connected
F i g u re 8 : P S / 2 ( K e y b o a rd &
Mouse)and VGA connected
4.3.2. Console connection
Plug keyboard, mouse and monitor to the console ports on the real panel of KVM Switch. (Figure 5)
4.3.3. System connection:
Please use Custom combo cable to connect your computers.
Please refer to the figures and instruction shown below for System connection.
Note: Please contact your dealer to purchase the
custom combo 4-1 cables if you need.
You can connect KVM switch to computers via three methods shown below:
A.Connect USB, PS/2 (keyboard/mouse) and VGA connectors to computers. We recommand users to
connect computers in this way. (Figure 7)
B.Connect only PS/2 (keyboard/mouse) and VGA connectors to computers (Figure 8).