Channel rename: <f4, Security setup: <f5> 7.7.1. security mode login – Longshine LCS-K916 User Manual
Page 18
![background image](/manuals/698276/18/background.png)
17
Figure 25: Channel Rename window
Figure 26: Security mode login window
Figure 27: Security setup main window
<Scroll Lock>
→<Scroll Lock>→<H>→<Enter> outside the OSD mode. Please refer section 6.7 Console
Lock.
Note: If you forget the password, the only way to permanently disable the security function is to key in a
universal password to unlock KVM. You need to key in this unlock password to release your device and
KVM, and then you can restart everything. Please contact with your agency/distributor to get the universal
password.
7.6. Channel rename: <F4>
Select the channel to rename by using up/down arrow key and press <F4> in OSD main menu. The
channel rename window will be shown for setting up the channel name. Press <ENTER> to save the
renamed channel name or <ESC> to cancel.
7.7. Security Setup: <F5>
7.7.1. Security mode login
Press <F5> in OSD main menu to enter security setup mode, the administrator login is required before
entering into the security mode.
The default administrator account is:
User Name: admin
Password: 123456
After login, the security setup main window will be shown on the screen. Please select the security item to
setup via <up arrow> and <down arrow> key, and press <left arrow> or <right arrow> key to change the
settings.