Microtel MicroWin 2000 - Manual (Page 16)

MicroWIN 2000 Manual
Version 1.0
currently set (See section Transferring Information With a Dialer, Page 57), MicroWIN 2000
will then disconnect from the dialer.
Automatically Acknowledging Dialer Alarms
Each entry can be setup to acknowledge specific alarms that are on the dialer. If a marked channel is
in alarm when MicroWIN 2000 connects to it, the dialer will be sent the command to acknowledge
this alarm. Calendar Call At Time Alarms from a dialer can also be acknowledged by having the
Auto Ack Calendar Call At Time Alarms box marked.
Edit Dialer Configuration
MicroWIN 2000 can be used to either configure an S1000 dialer or to view its configuration. To
edit an entry’s current configuration settings, click on the Edit Dialer Configuration button. This
will allow the user to view and change the entry’s current configuration (See section Edit a Dialer
Configuration, Page 70). Editing this information has Not changed this entry’s dialer in any way.
This configuration will have to be manually sent to the dialer before any changes actually occur on
the dialer (See section Transferring Information With a Dialer, Page 57).
Save Entry
Click the button Save to store the new entry in the database.
Cancel Entry
Click the button Cancel to not add the new entry in the database.
Edit An Existing Entry
To edit an existing entry’s information, select that entry in the list of entries and click the button
labeled Edit.
11