Microtel MicroWin 2000 - Manual (Page 77)

MicroWIN 2000 Manual
Version 1.0
Editing the System Setup
On the Edit Entry Configuration form, click the System Setup button.
The System Menu will be displayed. In the title bar, the name of the currently edited entry will
be displayed.
The following is a list of the settings that will be configured using this form. Each gives a
description of what the field is used for.
System Name
This is a 16 character descriptor for the configured dialer. This label will be displayed on Fax
Reports, Print Out Reports, and can be viewed after connected to the dialer in MicroWIN 2000.
Access Code
This is a 4-digit access code that allows access to the programming features after a call to or from
the dialer has occurred. MicroWIN 2000 also needs this access code when performing certain
commands, such as configuring the dialer, changing an channel’s output value, etc. The default is
1234. To disable this code, set it to 0000.
Ring Count
Before the dialer answers an incoming call, the dialer will wait this number of rings. This should
be kept to a minimum if there will be no users answering the phone at the dialer sight.
Message Repeats
When a call to or from the dialer has occurred and the dialer is currently talking in voice mode,
the dialer will speak the full alarm message this number of times.
72