Microtel MicroWin 2000 - Manual (Page 64)

MicroWIN 2000 Manual
Version 1.0
Transfer Priority
Since there are five different settings that the user can select at the same time, a priority was
devised so that all the information will be sent in a particular order.
First Last
Archives > Receive Config > Send Config > Snapshot > RealTime
This means that if an entry is connected and all 5 get selected at the same time, it will first
download the archives, then receive a dialer configuration, etc.
RealTime has the lowest priority because while a user is connected to an entry’s dialer, any other
transfer selections that the user makes should be done when it is selected.
Automatic Polling
An entry has the ability to automatically poll a dialer. (See section Creating A Dialer Entry,
Page 9 for more details). When it is time to make one of these automatic callouts, either an
Automatic Snapshot or Automatic Archive, the Transfer button for Snapshot or Archive is
pressed, respectively. When it is finished with this action, it will clear itself. If clearing this
action results in all the actions being cleared, it will do the normal action when all actions become
cleared: it will disconnect from the dialer.
Dialer Information
After an entry has connected once to its associated dialer, the dialer’s version information is now
available for a user to view.
Clicking the Dialer Information button will bring up a dialog box showing the Dialer’s Name,
Version, Revision and Revision Date. If all fields are blank (“-“), then the dialer hasn’t been
connected to yet.
Summary Page, Snapshot Menu, and Archive Menu buttons at the bottom of the form are
movement buttons used to easily change to the indicated form.
59