Microtel MicroWin 2000 - Manual (Page 35)

MicroWIN 2000 Manual
Version 1.0
30
Overview of Collecting Archives
This section will go over how to setup archiving on an S1000 dialer. It will show how to setup
the archiving configuration, how to send it to the dialer, and how to receive previously archived
data from the S1000 dialer. This downloaded archive data will then be discussed in detail to give
a full understanding of all the information that a dialer will archive.
This section assumes that MicroWIN 2000 has been setup properly so that an entry can connect to
its associated dialer. If any connection problems arise while performing these actions, please
refer to the sections on setting up MicroWIN 2000 and the Dialer to talk to one another.
Setup the Archiving Configuration
With MicroWIN 2000 running, move to the Setup MicroWIN Entries form. A list of the entries
that are currently in the system will be displayed.
Highlight the entry that is to be configured with archiving. In this example, West Judge Perez
Lift Station will be configured. Click on the Edit button to bring up the Edit MicroWIN Entry
form for this entry.
To setup the configuration for this entry’s associated dialer, click the Edit Dialer Configuration
button near the bottom of this form.