New England Arbors VA84254 - Manual (Page 3)

S T E P T W O
3 The Devonshire Arbor
S T E P T W O
Assemble the side panel together as shown. You will need 1 x Bottom Rail, 1 x Middle Rail, 1 x Top Arch Rail and 5 x Vertical Spindles.
Note the three different lengths of the Vertical Spindles.
Assemble Side Panels
1
1
insert 1st
insert 2nd
insert 3rd
Bottom Rail
Middle Rail
Top Arch Rail
52 3/4” Spindles
51” Spindles
Carefully navigate the side panel assembly on top of a post as shown below. Assemble by firstly inserting the Top Arch Rail into
the routed hole, followed by the middle rail and bottom rail.
Fasten the rails into its corresponding bracket using the 3/4” screws provided (2 screws per bracket) as shown.
2
3
3
2
insert 1st
insert 2nd
insert 3rd
Lay down a second post, align, and insert the panel from the previous step following the same
order from step number two.
Fasten the rails into its corresponding bracket using the 3/4” screws provided (2 screws per bracket) as shown.
4
5
4
5
51 1/2” Spindles