Vermont Casting DVBR42 - Manual (Page 31)

31
DVBR Series Direct Vent Gas Fireplace
20000584
CO103
Gas Conversion
Air shutter
2/15/99 djt
Fig. 63 Remove air shutter from burner pan.
Shutter
Retaining
Screw
Burner Pan
Air Shutter
Front View
CO103
Fig. 67 Removing pilot hood.
CO105
Gas Conversion
Pilot
2/15/99 djt
Index
Marks
CO105
Pilot Hood
Pilot Bracket
CO106
Gas Conversion
Pilot2
2/15/99 djt
Fig. 68 Removing pilot orifice.
CO106
Pilot Orifice
CO127
DVBR air shutter
conversion
2/05
Shutter Retaining
Screw
Slots Open
Burner Pan
Front View
Natural Gas
Fig. 64 Conversion Air shutter.
CO127
CO128
Manifold Mounting Bracket
2/05
Hex Nut
Manifold
Mounting
Bracket
Screw
Burner
Top View
CO128
Fig. 65 Locating manifold mounting bracket.
NOTE: It is not necessary to remove the pilot tube
for conversion.
Pilot Conversion - PSE
1. Loosen pilot hood turning counterclockwise using a
7/16” end wrench. (Fig. 67)
2. Remove pilot orifice with needlenose pliers.
(Fig. 68)
3. Install LP pilot orifice.
4. Re-install pilot hood and tighten until mark on pilot
hood aligns with mark on pilot bracket.
Conversion is complete.
Pilot Conversion - SIT
1. Remove pilot hood by lifting up. (Fig. 69)
2. Remove pilot orifice with Allen wrench. (Fig. 70)
3. Install conversion pilot orifice.
4. Reinstall pilot hood. Be sure to align pilot hood with
index tab.
Conversion is complete.
CO105a
DV360/580
Gas Conversion
Pilot
1/28/00 djt
Pilot Hood
Pilot
Bracket
CO105a
Fig. 69 Remove pilot hood.
CO106a
DV360/580
Gas Conversion
Pilot2
1/28/00 djt
Index Tab
Pilot
Bracket
Allen Wrench
CO106a
Fig. 70 Remove pilot orifice.
������
����������������
���������
Manifold
Bracket
Manifold
Split Nut
Orifice
FP1554
Fig. 66 Manifold mounting bracket.