Canon FAX-L400 - Manual (Page 47)

4-14
❚ Regular dialling:
Use the numeric keys to enter the fax number
→ press OK.
Ex:
• If you make a mistake, press 4 (–), or press Function
→ Delete to delete the last number. Or press
Function
→ Clear to delete all numbers you entered.
• You must enter the second fax number within five seconds of entering the first one. After that, all
subsequent fax numbers must be entered within 10 seconds of each other. If you wait longer than this,
the machine automatically begins scanning the document for sending. If you prefer the machine not to
do this, disable the TIME OUT setting. (
→ p. 10-6)
• If you want to review the numbers you just entered, use 4 (–) or e (+) to scroll through the numbers.
❚ Redialling:
Press Redial/Pause to dial the last number you dialled with numeric keys.
4 Press Start.
• After the scanning is finished, the machine starts to dial the number.
• The machine first sends the document to the one-touch speed dialling destinations, then the coded speed
dialling destinations, and finally to the destinations dialled using regular dialling.
• To cancel sending, press Stop/Reset
→ 4 (–). Sending to all destinations specified in step 3 is cancelled.
You can not cancel just one destination.
After cancelling, the machine prints a MULTI TX/RX REPORT. (
→ p. 8-4)
• If a number is busy, the machine continues sending to the other destinations and then redials the
number that was busy.
• If the machine’s memory becomes full while scanning your document, MEMORY FULL appears in the
LCD and the document being scanned stops in the ADF. Press OK to make the document come out
automatically. If this happens, divide the documents into several sections and send each section
separately.
NOTE
NOTE
TEL= 9057951111