Canon FAX-L400 - Manual (Page 93)

10-6
TX SETTINGS Sets the transmission functions.
1.ECM TX ECM (Error Correction Mode) transmission is turned on
or off.
ON All transmissions are conducted with ECM if the other
party’s fax supports ECM.
OFF ECM is turned off.
2.PAUSE TIME Sets the length of the pause you insert into a dialling
sequence.
01
to 15SEC
3.AUTO REDIAL Sets whether to perform automatic redial when the other
line is busy or no answer.
ON Customizes the redial operation.
1.REDIAL TIMES Sets the number of retries.
01
to 10TIMES
2.REDIAL INTERVAL Sets period of time between rediallings.
02
to 99MIN.
OFF After the first attempt at dialling fails, redialling is not
attempted.
4.TIME OUT Enables/disables automatic scanning of documents after
the fax number is entered by using speed dialling.
ON Scanning begins automatically in 5 or 10 seconds after
you enter the phone number. (
→ pp. 4-9, 4-14, 4-15)
OFF Press Start to scan document. Otherwise, AUTO CLEAR
function activates and the LCD returns to standby display
after 2 minutes. (
→ User’s Guide)
RX SETTINGS Sets the reception functions.
1.ECM RX ECM (Error Correction Mode) reception is turned on
or off.
ON All receptions are conducted with ECM if the other
party’s fax supports ECM.
OFF ECM is turned off.
Name Descriptions