Canon FAX-L400 - Manual (Page 78)

8-3
The machine is factory-set to print a TX (transmission) REPORT only when an error occurs during sending.
To change this setting
→ p. 10-5.
If you set the machine to print a report, a TX REPORT or an ERROR TX REPORT, similar to the ones
below, will be printed depending on the setting you select.
TRANSMISSION OK
TX/RX NO 0003
DESTINATION TEL # 1 432 2060
CONNECTION ID Canon OPTICS
ST. TIME 12/27 14:59
USAGE T 00 00
PGS. SENT 0
RESULT NG #018
BUSY/NO SIGNAL
03/12 2002 17:47 FAX 123 4567 CANON 001
***********************
***********************
***
*** TX REPORT
TX FUNCTION WAS NOT COMPLETED
TX/RX NO 0004
DESTINATION TEL # 20 545 8545
DESTINATION ID Canon EUROPE
ST. TIME 03/12 17:21
TIME USE 00 18
PAGES SENT 1
RESULT NG #0018 BUSY/NO SIGNAL
THE SLEREXE COMPANY LIMITED
SAPORS LANE¥BOOLE¥DORSET¥BH25 8ER
TELEPHONE BOOLE (945 13) 51617 — FAX 1234567
Our Ref. 350/PJC/EAC December 3, 2002
Dr. P. N. Cundall,
Mining Surveys Ltd.,
Holroyd Road,
Reading,
Berks.
03/12 2002 17:21 FAX 123 4567 CANON 001
*******************************
*******************************
***
*** ERROR TX REPORT
If you enable the REPORT WITH TX IMAGE setting. ( → p. 10-5)
The first page of the document will print on the report to remind
you of the contents of the document.
OK: Transmission successful
NG: Some or no pages sent
Number or pages sent
Transmission duration
Transmission time
TX (Transmission) REPORT
8
Repor
ts and Lists