Canon FAX-L400 - Manual (Page 72)

7-3
Switching Temporarily to Tone Dialling
Many information services for banks, airline reservations, hotel reservations, etc., require tone dialling for their
services. If your machine is connected to a rotary pulse line, follow this procedure to set the machine temporarily
for tone dialling:
1 Press FAX to set to Fax mode.
Ex:
2 Pick up the handset of your telephone.
3 Enter a destination using the numeric keys on your telephone or using a one-touch speed
dialling key, coded speed dialling code, Redial/Pause key or the numeric keys on the
machine.
4 When the recorded message of the information service answers, press Function → Tone/+
to switch to tone dialling.
Ex:
• When Tone/+ is pressed, T is displayed in the LCD.
• If your telephone line uses tone dialling, go to the next step.
5 Use the numeric keys on the machine to enter the numbers requested by the information
service.
Ex:
• Numbers entered after pressing Tone/+ will be dialled using tone dialling.
• After pressing Tone/+, you can not use the numeric keys on the telephone. Use the numeric keys on the
machine.
6 If you want to receive faxes, press Start.
7 Hang up to disconnect the call.
• Tone dialling is cancelled when you disconnect the call.
TEL= 123 4567T34
TEL= 123 4567T
03/12 2002 TUE 15:11
FaxOnly
STANDARD
7
Special Featur
es