Canon FAX-L400 - Manual (Page 77)

8-2
The machine is factory-set to automatically print an ACTIVITY REPORT after every 20 transactions. If you want
to print an ACTIVITY REPORT before it is automatically printed, follow this procedure:
• If you prefer the machine not to print an ACTIVITY REPORT after every 20 transactions, set
ACTIVITY REPORT to OFF. (
→ p. 10-5)
1 Press Function → Report.
2 Use 4 (–) or e (+) to select 1.ACTIVITY REPORT → press OK.
→
• The machine prints an ACTIVITY REPORT and the LCD returns to standby display.
Transactions in an ACTIVITY REPORT are listed chronologically.
A03/12 15:10 905 795 1111 5001 AUTO RX ECM 1 OK 00
,
33
A03/12 15:14 905 795 1111 5002 AUTO RX ECM 1 OK 00
,
24
A03/12 15:22 Canon TOKYO 03 3758 2111 0001 SEQ. B
,
CAST ECM 3 OK 01
,
18
A03/12 15:24 Canon AUSTRALIA 2 887 0166 0001 SEQ. B
,
CAST ECM 3 OK 01
,
18
A03/12 16:10 905 795 1111 5003 AUTO RX ECM 1 OK 00
,
18
A03/12 16:16 2 887 0166 5004 AUTO RX ECM 4 OK 00
,
59
A03/12 16:27 Canon EUROPE 20 545 8545 0002 TRANSMIT ECM 1 OK 01
,
20
A03/12 16:30 Canon EUROPE 20 545 8545 0003 TRANSMIT ECM 1 OK 04
,
12
03/12 16:53 03 3758 2111 5005 AUTO RX ECM 1 OK 01
,
16
03/12 17:08 Canon AUSTRALIA 2 887 0166 0004 TRANSMIT ECM 3 NG 00
,
51
03/12 17:20 CANON OPTICS 1 432 2060 0005 TRANSMIT 0 NG 00
,
01
*****************************
*****************************
***
*** ACTIVITY REPORT
03/12 2002 17:28 FAX 123 4567 CANON 001
3 STOP
0 #0018
ST. TIME DESTINATION TEL/ID NO. MODE PGS. RESULT
Transaction (TX/RX) number
Transaction mode
Indicates an entry
that has appeared
on a previous report.
Error page*
Error code
Stop/Reset was pressed during transaction
Transaction duration
* The number of pages that have been printed and the number of pages indicated
on the report may not be the same.
Error correction mode transaction
03/12 2002 TUE 15:11
FaxOnly
STANDARD
REPORT
1.ACTIVITY REPORT
NOTE
ACTIVITY REPORT