Appendix d, Modify canister to vend 12oz cups, Appendix d modify canister to vend 12oz cups – CMS Products 674 User Manual
Page 113
HotCup Operators’ Guide
Appendix D
November, 2007
D-1
6740001
Appendix D
Modify Canister to Vend 12oz Cups
Proceed as follows:
1.
Remove all cups, then remove the turret center and turret base assembly from the canister.
2.
Break off all 8 tabs on the bottom of the turret base as shown.
NOTE
You will no longer be able to vend smaller cups from this canister!
To return to vending smaller cups, you must replace the modified
turret base with an original turret base (part number 6233048)
from National Vendors Parts Department.
3.
Replace the turret center and turret base in the canister and load cups.
4.
Drop a cup. If it drops properly, you are finished with the procedure, if not, continue with step 5.
5.
Remove all cups, then remove the canister from the cup mechanism assembly.
6.
Remove the funnel, replace the canister, and reload cups.
7.
Drop a cup. If it drops properly, you are finished with the procedure, if not, continue with step 8.
8.
Order a 5 oz/18oz cup ring (part number 6233120) from National Vendors Parts Department.