Slant/Fin EC-10 Installation - Manual (Page 17)

BURNER DATA—CARLIN BURNERS FOR PACKAGED BOILERS ONLY
† Head settings shown are approximate ONLY. See “START-UP” on page 8.
NOTES:
(1) Insertion depth is 4.5".
(2) See “PRECAUTIONS BEFORE STARTING OIL BURNERS” and “START-UP” on page 8 and burner figures on this page.
(3) All burner models shown are single stage.
Boiler
Model
Burner
Model
Blast
Tube
Firing
Rate
GPH
Nozzles
Oil Pump
(PSIG)
Head
Adjusting
Plate †
Approx.
Air Band
Setting
Shutter
Non-
Adjustable
Size
GPH
Angle &
Type
MFR.
EC-13 EZ-1HP 7" Long
0.65 0.5 45˚A Delavan 170 .60/.65 0.53 Blank
0.7 0.5 45˚A Delavan 195 .60/.65 0.55 Blank
EC-14 EZ-1HP 7" Long
0.8 0.65 60˚B Delavan 150 .60/.65 0.6 Blank
0.9 0.75 60˚B Delavan 145 0.75 0.65 Blank
EC-15 EZ-1HP 7" Long
1 0.85 60˚B Delavan 138 .85/1.00 0.75 Blank
1.1 0.85 60˚B Delavan 168 .85/1.00 0.85 Blank
EC-16 EZ-1HP 7" Long
1.15 0.85 60˚B Delavan 185 .85/1.00 0.9 Blank
1.25 1 60˚B Delavan 155 1.10/1.25 0.9 Blank
Figure 5. Electrode placement, retention ring assembly and nozzle adapter.
Figure 6. Installing head positioning bar.
It is suggested that due to the positive pressure observed in the chamber that the air tube hole and any other passages of the flue gas
leakages be sealed to avoid combustion gas fumes from leaking into the boiler room.
EUTECTIC EC-10 17