TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 14)

2-2 Chapter 2 - Getting Started
Software Overview
RMS-EXT for the Legacy 6000
Software Version 2.00
Software Overview
This chapter assumes that the Legacy 6000 hardware has been properly installed and clean, reli-
able power has been supplied.
Powering Up
To power up the Legacy 6000 console, press the orange button to the left side of the console face-
plate (Figure 2-1). When the Legacy 6000 console is powered up, RMS-EXT for the Legacy 6000
automatically starts. The first software page is the Main RMS-EXT Launcher (Figure 2-2). System
Setup, System Tools, and Application Rate Manager (ARM) are accessed from the Main Launcher
page. This Chapter focuses on how RMS-EXT for the Legacy 6000 operates and how to configure
the system, using the System Setup application.
Figure 2-1: The Legacy 6000 Console
Power On/Off
Enter Key
Arrow Keys
Escape Key
Function Keys
(Right Side) Function Keys
(Left Side)
Brightness &
Contrast