TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 77)

RMS Mapper for the Legacy 6000
Software Version 2.00
Chapter 5 - RMS Mapper 5-13
Start Mapping
The Map Objects Soft-Key
The primary task performed in the Map page is object mapping. In RMS Mapper, objects include
points, polylines, or polygons. As explained before, you can pre-define some point and hazard
objects in the Road maker setup. Each pre-defined object has a corresponding soft-key in the Map
page. Mapping objects are also accessed via the Map Objects soft-key. Pressing this soft-key acti-
vates a menu containing all graphical object types. Each object type is described in Table 5-6.
To select an object, use the up and down arrow keys on the legacy 6000 to highlight the desired
object. Press the Enter key.
Figure 5-10: The Mapper Map Page
Map Objects
soft-key