TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 39)

RMS-EXT for the Legacy 6000
Software Version 2.00
Chapter 3 - Real-time Setup 3-7
ARM Launcher
on the Legacy 6000. All profiles are created in RMS Office.
Report Setup Menu Items
Running ARM Setup
ARM Setup handles data file names as well as a few product application parameters. To run ARM
Setup, select the ARM Setup tab in the ARM Launcher page (Figure 3-4). This brings up the Main
ARM Setup page (Figure 3-6). Table 3-3 lists all of the ARM Setup items and their descriptions.
The record file (RCD) and the event file (EVT) are automatically named, based on the Job name.
Figure 3-5: The Job Report Page
Item Description
Agency The Agency that the job is for. From Agency profile.
Operator The person performing product application. From Personnel profile.
Driver The person driving the vehicle. From Personnel profile.
Table 3-2: Report Setup Menu Item Descriptions