TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 61)

RMS-EXT for the Legacy 6000
Software Version 2.00
Chapter 4 - Real-time Operation 4-19
Exiting Real-Time Operation
Exiting Real-Time Operation
To exit real-time operation, press the Exit button located at the bottom left corner of the
current page. If data is being stored to the PC card, the exiting process may take a minute
or so to properly store this data.
RMS-Map Manager
Some Legacy 6000 system kits include RMS Office for an office computer or laptop. RMS Map
Manager Tools can be used to view application "as applied" maps. Figure 4-21 shows “as applied”
data and Roads data in the Map Manager view. To view "as applied" maps, copy the record files
(RCD) from the PC card to a desktop or laptop computer. Consult the Map Manager user’s guide
for instructions on how to generate application reports from the data
Figure 4-20: Exiting Real-time Application
Exit Soft-Key