TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 68)

5-4 Chapter 5 - RMS Mapper
Mapper Setup
RMS Mapper for the Legacy 6000
Software Version 2.00
Mapper Setup and Operation Steps
Soft-key Step Description
Start Mapper Application. Press to start the Mapper application. Select or
create a job and continue to Mapper setup.
Accept Job. Select or create a job and press this soft-key. The Mapper
Launcher menu appears. Run Mapper and Road Marker setups or continue on
to real-time mapping process.
Mapper Setup. Run this setup to name data files and set the data collection
rate. You must name a Map File prior to starting the real-time mapping process.
Road Markers. Run this setup to pre-define point and hazard objects. A pre-
defined point or hazard object has its own soft-key in the real-time Map page.
Define commonly mapped objects here.
Start Mapping. When the setup process is complete, start real-time mapping
by pressing this soft-key.
Table 5-1: Mapper Setup and Operation Steps