TeeJet Legacy 6000 RMS_EXT User Guide - Manual (Page 52)

4-10 Chapter 4 - Real-time Operation
Product Application
RMS-EXT for the Legacy 6000
Software Version 2.00
The Product View
Selecting Product view from the Options menu changes the Map page from Coverage view to the
Product view. This view displays the boom activity for a specified product. To view a specific prod-
uct, press a product soft-key on the left side of the page. Each soft-key displays the name of the
product and the current rate. Figure 4-7 shows the view for the carrier Water.
If booms sections are turned off, this activity appears in the Product view and also recorded in the
session record file. An example of boom activity is shown in Figure 4-8.
Figure 4-7: The Product View
Figure 4-8: Viewing Boom Activity
Product Soft-key