Tie Down Vector Dynamics Foundation System for Wind Zones lll - Manual (Page 6)

Longitudinal Hardware Kit
Part # 59026 (for use with 59271)
Vector Lateral Hardware Kit
Part # 59024
(for use with 59271)
Struts for Longitudinal Systems
Part No. Strut Length
Pier Height
59016 30” up to 2 Blocks
59012 39” up to 3 Blocks
59013 44” up to 4 Blocks
59014 53” up to 5 Blocks
59015 65” up to 6 Blocks
Or
these products available
at your local hardware store
Center Compression Strut
#48612 - Single Section 62” - 108”
#48613 - Double Section, 34” - 60”
Or
these products available
at your local hardware store
Center Compression Strut
#48612 - Single Section 62” - 108”
#48613 - Double Section, 34” - 60”
Or
these products available
at your local hardware store
Center Compression Strut
#48612 - Single Section 62” - 108”
#48613 - Double Section, 34” - 60”
Or
these products available
at your local hardware store
#48612 - Single Section 62” - 108”
#48613 - Double Section, 34” - 60”
Center Compression Strut
6 Revised: 8/19/08
Or
these products available
at your local hardware store
Center Compression Strut
#48612 - Single Section 62” - 108”
#48613 - Double Section, 34” - 60”
Vector 2000 3 Sq. Ft. Pad
Part # 59271
(for double block longitudinal)
1 required with 59026 Longitudinal System
2 required with 59024 Lateral System
Vector 2000 3 Sq. Ft. Pad
Part # 59276 for double
block sets with strap and
hardware.
3/4"
17/32"
from end
Strut
or Swivel Strap
Connection
Frame Tie
Connection
Struts can be cut
to any size needed