Toa C-RM700 - Manual (Page 15)

6.1.6. Activating the automatic functions
When a Combination camera is connected to the system, its automatic functions can be enabled using the
Auto key.
1. Press the Auto key while the camera is selected.
The Auto key will light and the camera's
automatic functions (Auto-pan, Auto trace,
Preset sequence, or Tour) will begin to operate.
Auto-pan:
Automatically rotates the camera horizontally.
Auto trace:
Automatic repetition of manual camera
operations that have been stored in memory.
Preset sequence:
Automatic sequential display of camera positions
in the order that their position numbers were
preset.
Tour:
Stores the preset and trace performed at each
camera in the order of desired reproduction
number, and automatically reproduces such
operation.
2. Press the Auto key again.
The Auto key extinguishes and automatic
operations are stopped.
Note
Setting destination to which automatic function to operate differs depending on the type of protocol of the
camera connected. Refer to the table below for details.
15
A U T O
LCD screen
AUTO AUTO
Lights
AUTO AUTO
Extinguishes
FOCUS
Protocol Setting destination Programming destination Referral page
TOA Type A Camera menu Camera p. 46
TOA Type B Auto-key Remote controller p. 32
6.1.7. Activating the focus function
When a Combination camera is connected, its image can be focused using the Focus key.
Press the Focus "+" or "-" key while the camera is selected.
Focusing continues as long as the key is pressed.
Pressing the "+" key focuses the lens on distant objects, and
pressing the "-" key focuses on near objects.