Toa C-RM700 - Manual (Page 32)

32
7.4.5. Manual speed (Protocol: Type B only)
Sets the Combination camera's maximum rotation speed in manual operation.
1. Press the Menu key for 3 seconds or more to display the menu screen.
2. Tilt the joystick up or down to select "MANUAL SPEED," and confirm it with the SET key.
The setting contents will appear on Line 2.
3. Tilt the joystick left or right to select one of the following setting contents and confirm it with the SET key.
[Setting contents]
M A N U A L S P E E D
1 . 2 4 ° / S E C 1
7.4.6. Auto-key (Settable to Type B by this unit)
Sets one of the automatic operations (Auto-pan, Auto-trace, Preset sequence and Tour) for the Combination
camera to ON or OFF. This function can only be enabled when the Control key is lighting.
Note: For the type A camera, perform automatic operation settings at the Combination camera.
1. Press the Menu key for 3 seconds or more to display the menu screen.
2. Tilt the joystick up or down to select "AUTO KEY," and confirm it with the SET key.
The setting contents will appear on Line 2.
3. Tilt the joystick left or right to select one of the following setting contents and confirm it with the SET key.
[Setting contents]
A U T O K E Y
1 . A U T O P A N 1
Note: The Auto key is set to "1. Auto-Pan" by the factory.
Note: Functions that can be used differs depending on the type of Combination camera. For the functions,
refer to p. 54 , "Auto-key settings."
Note: The manual speed is set to "5. 120º /SEC" by the factory.
1. AUTO PAN Calls up the automatic panning function.
2. AUTO TRACE1 -
9. AUTO TRACE8
Stores the manual camera operations into the Combination camera, and
recalls the function to automatically reproduce such operations.
10. PRESET SEQ Calls up the function to automatically reproduce the camera images in the
order of preset numbers set to the Combination camera.
11. TOUR1 - 26. TOUR16 Calls up tours stored in each camera.
1. 24º/SEC 3. 60º/SEC 5. 120º/SEC 7. 240º/SEC
2. 40º/SEC 4. 90º/SEC 6. 160º/SEC 8. 360º/SEC