Toa C-RM700 - Manual (Page 42)

42
[Automatic operation settings]
After performing the settings in Steps 1-3 above, tilt the joystick up
or down to select one of the following settings, then press the SET
key to confirm it.
[Deleting settings]
After pressing the Alarm reset key, press the SET key.
7.4.21. Function
By simply pressing the function key (F1-F8), the camera image (camera number and position number) can be
displayed on the monitor.
It is also possible to control alarm contact switching and instruct the camera to perform multiple automatic
operations.
1. Press the Menu key for 3 seconds or more to display the
menu screen.
2. Tilt the joystick up or down to select "FUNCTION," and
confirm the selection with the SET key.
The setting will appear on Line 2, and the unit switches to
function key entry waiting mode.
Note that when the camera number or the position number
is not programmed in advance, the "***" indication is
displayed in place of the number.
3. Tilt the joystick to the left or right to select the desired
function key and confirm the setting with the SET key.
The flashing cursor moves to the camera number.
4. Enter the camera number using the numeric keypad, and
confirm it with the SET key.
Enter a number from 1 to 16. The flashing cursor moves to
the position number.
5. Enter the position number with the numeric keypad, and
confirm it with the SET key.
Enter a number from 1 to 255.
Note: Entering "0" will switch the screen to full-screen
display, and will not execute position playback.
6. Repeat Steps 3-5 to continue to set the camera images to
be displayed on the monitor.
Press the Clear key to return to the setting item display.
3
4
5
F U N C T I O N F 1
C A M P O S
SET
F U N C T I O N F 1
C A M P O S
F U N C T I O N F 1
C A M 1 5 P O S
F U N C T I O N F 1
C A M 1 5 P O S 1 2 3
F
1 2 3 SET
(Example)
1 5 SET
(Example)
F U N C T I O N F 1
A U T O P A N A
F U N C T I O N F 1
C A M P O S
F
Function key
No. (F1 - F8)
Position No.
Camera No.
AUTO PAN Continues panning between 2 points set on the camera menu.
AUTO TRACE Repeats manual operations set on the camera menu.
PRESET SEQUENCE Plays back the positions stored in the camera in setting order.
TOUR1 - 16 Execute the tour set on the camera menu.
SHIFT
Assigns the desired function key as a shift key. For the usage of the Shift
key, refer to
p. 43 .
Note: Usable functions differ depending on the type of camera and protocol. For functions, refer to p. 55 ,
"Function key settings."