VACUUBRAND MZ 1C - Manual (Page 95)

page 95 of 102
Notes on return to the factory
Repair - return - DAkkS calibration
Safety and health of our staff, laws and regulations re-
garding the handling of dangerous goods, occupational
health and safety regulations and regulations regard-
ing safe disposal of waste require that for all pumps and
other products, the ”Health and safety clearance form”,
pg. 99, must be sent to our office fully completed and
signed before any equipment is shipped to the authorized
service center.
Fax or mail a completed copy of the health and safety
clearance form to us in advance. The declaration must ar-
rive before the equipment. Enclose a second completed
copy with the product. If the equipment is contaminated,
you must notify the carrier.
No repair / DAkkS calibration is possible unless the
correctly completed form is returned. Inevitably, there
will be a delay in processing the equipment if informa-
tion is missing, or if this procedure is not followed.
If the product has come in contact with chemicals, radioac-
tive substances or other substances dangerous to health
or environment, the product must be decontaminated pri-
or to sending it back to the service center.
- Return the product to us disassembled and cleaned
and accompanied by a certificate verifying decontami-
nation or
- Contact an industrial cleaning and decontamination
service directly or
- Authorize us to send the product to an industrial clean-
ing facility at your expense.
To expedite repair and to reduce costs, please enclose a
detailed description of the problem and the product’s op-
erating conditions with every product returned for repair.
NOTICE