General information, Intended use, Notice – VACUUBRAND CVC 3000 User Manual

Page 13

Advertising
background image

page 13 of 80

General information

Remove all packing material from the packing box. Re-

move the product from its packing-box and retain all pack-

aging until the equipment is inspected and tested. Inspect

the equipment promptly and carefully.

If the equipment is damaged, notify the supplier and the

carrier in writing within three days. Retain all packing ma-

terial for inspection. State the item number of the product

together with the order number and the supplier’s invoice

number. Failure to check and give notice of damage will

void any and all warranty claims for those deficiencies.

Store the equipment in dry and non-corrosive conditions

(see also “Technical data”, pg. 21) if the equipment is

not used immediately.

Valves and/or vacuum pumps are necessary to operate

the vacuum controller. Otherwise the controller will oper-

ate as measuring device.

+

Do not use any damaged equipment.

Intended use

+

Ensure that the individual components are only con-

nected, combined and operated according to their de-

sign and as indicated in the instructions for use.

Use only

original manufacturer’s spare parts and

accessories. Otherwise the safety and performance

of the equipment, as well as the electromagnetic com-

patibility of the equipment might be reduced.

The CE mark or the cTÜVus mark may be voided if not

using original manufacturer’s spare parts.

+

Comply with all notes on correct vacuum and electri-

cal connections; see section “Use and operation”, pg.

24.

+

The controllers are designed for operation at

ambient

temperatures and gas temperatures at the pressure

transducer between +50°F and +104°F (+10°C and

NOTICE

Advertising