VACUUBRAND CVC 3000 E User Manual

Page 25

Advertising
background image

page 25 of 75

connection plug of the power supply

jacks for connection of

VACUU•BUS components

(e.g., coolant valve)

serial interface

RS-232 C

Rear side CVC 3000 E

venting connection

vacuum connection

to pump

rating plate

Selection knob

• Press to reach the set-up menu of the function

• Turn to choose the parameter you want to modify

• Press to select the parameter you want to modify

• Turn to change the set value of the parameter

• Press to confirm change of value and to reach further

parameters, or to leave the set-up menu

Attention: Do not assemble or remove plug connections off-axis!

Orient the plug correctly before inserting. To connect additional

components use VACUU•BUS Y-adapters and extension cables. If

an external pressure transducer is connected, it is recognized auto-

matically. Further information on how to use several sensors simul-

taneously is available upon request.

vacuum connection

to application

solenoid operated

in-line valve

spring clip for

assembly in

cut-out

Advertising