VACUUBRAND CVC 3000 E - Manual (Page 42)

page 42 of 75
This screen-shot shows the factory-set values.
VACUULAN 40 mbar
00:13:00
When selecting ”Graphic” the display shows a pressure vs. time curve.
The timeline in the diagram adapts automatically to the process time.
+
Press the selection knob twice to return to the standard display.
Assembly of a vacuum system
+
Assemble vacuum connection lines between CVC 3000 E controller,
vacuum pump (diaphragm pump with in-line valve or Vacuum-Man-
agement-System) and vacuum application.
+
Assemble electrical connections.
+
Connect coolant if necessary.
Vacuum for filtration and suction
+
Select ” Pump down” function.
+
Set ”Minimum” to a value which provides adequate suction but does
not lead to evaporation of the solvent.
+
Start process by pressing ”START/STOP” key.
alternatively:
+
Select ” Vac control” function.
+
Set ”Set vacuum” (and ”Hysteresis”, if necessary) to a value which
Application examples
VACUULAN
Set vacuum 19 Torr
Switch on 150 Torr
Delay 15 min
- - - - - - Graphic - - - - - -
- - - - - - - Back - - - - - - -