Calibration in the factory – VACUUBRAND MPT 200 User Manual

Page 15

background image

page 15 of 20

Documents are only to be used and distributed completely and unchanged. It is strictly the users´ responsibility to check carefully

the validity of this document with respect to his product. Manual-no.: 999226 // 07/10/2011

Calibration in the factory

DAkkS calibration vacuum gauge DCP 3000 with external pressure transducer .......................900215

Control of measuring equipment


VACUUBRAND DAkkS calibration laboratory is accredited by the Deutsche Akkreditierungss-

telle GmbH (national accreditation body of the Federal Republic of Germany) for the measurable vari-


pressure in the pressure range from 7.5*10


Torr to 975 Torr (10


mbar to 1300 mbar) in

accordance with the general criteria for the operation of testing laboratories defined in the DIN EN ISO/

IEC 17025:2000 series of standards (accreditation number D-K-15154-01).

Rely on calibration in the VACUUBRAND calibration laboratory:

- To meet the requirements of the DIN ISO 9000ff and 10012 series of standards regarding the calibra-

tion of inspection, measuring and test equipment at specified intervals.

- To document that the vacuum gauges calibrated are traceable to national standards of the PTB

(Physikalisch-Technische Bundesanstalt; German national institute for science and technology and

the highest technical authority of the Federal Republic of Germany for the field of metrology and

certain sectors of safety engineering).

This manual is related to the following products: