Verity Audio Rocco - Manual (Page 11)

ROCCO OWNER’S GUIDE
V.01 February, 1 st , 2004
VERITY AUDIO PAGE 11
Specifications
Bandwidth 18 Hz to 100 Hz ± 3.0 dB
Crossover frequencies
30 • 35 • 40 • 50 • 56 • 63 • 71 • 90
• 250 Hz (Movie)
Woofer 12 inch • fiber-reinforced cone
• rubber surround
Level Range (RCA inputs) - infinite to + 6 dB
Level Range (XLR inputs) - infinite to +12 dB
Maximum Output 120 dB SPL
Break in time 75 hours (63%)
400 hours (99%)
Electronic THD and noise < 1 % THD at rated power
Damping factor > 100 below 100 Hz
Inputs XLR and RCA
Available power 700 watts
Idle Power Draw 65 watts
Amplification Gain 35 dB (RCA inputs) 41dB(XLR inputs)
Width 416 mm (16.4 in)
Depth 716 mm (28.2 in)
Height 559 mm (22.0 in)
Net Weight 64.5 kg (141 lbs.)
Gross Weight 77 kg (170 lbs.)
Standard Finish Italian High-Gloss Black Piano
Optional Finish Italian High-Gloss Makore
High-Gloss Metallic Silver
Limited Warranty
The Verity Audio Rocco is covered by a limited warranty
against defects in material and workmanship for a period of
one year from the date of shipment to the authorized Verity
Audio dealer.
The product shipped for services under this warranty shall be
delivered by the owner to the factory with a return
authorization number clearly written on the box. Products
shipped without return authorization number will be returned
to sender.
The included warranty registration card should be properly
filled and returned to the factory within ten (10) days from the
date of purchase.
Damages resulting from negligence, misuse or accident,
improper repair procedures or alterations, or operation that is
contrary to the manufacturer’s instructions are excluded from
this warranty.
Verity Audio reserves the right to modify or change the
equipment, all or in part, at any time, in order to include any
refinements deemed appropriate by Verity Audio.
This warranty is expressly in lieu of all other warranties,
expressed or implied and all other obligations or liabilities on
the part of Verity Audio. No other person (s), including dealer,
agent, representative are authorized to assume for Verity Audio
any liability on its behalf or on its name except to refer
purchasers to the present warranty.
Verity Audio liability to any purchaser shall be to replace any
part of the product itself because of defective materials or
workmanship, and Verity Audio shall not be liable for any
consequential damage as a result of defects in material or
workmanship.
Notes